Abstract
In order to reveal the influence of cutting parameters on the surface residual stress of 2024 aluminum alloy in ultra-precision cutting, the thermal coupling simulation of 2024 aluminum alloy ultra-precision cutting process was carried out based on ABAQUS software, and it was verified by the residual stress test of ultra-precision machined samples. The results show that the dominant factor of the machining residual stress of 2024 aluminum alloy ultra-precision with single crystal diamond tool is the plastic deformation caused by cutting force. With the normal ultra-precision machining parameters, the residual stress of the machined surface of 2024 aluminum alloy is mainly compressive stress. With the increase in distance to the machined surface, the residual compressive stress value decreases and gradually transforms into tensile stress, and the total residual stress depth is less than 8 μm. With the increase in cutting depth (0.01–0.03 mm), the reduction of cutting speed (150–50 m/min) and the increase of feed (0.01–0.024 mm/r), there is an increasing trend of the residual stress on the machined surface of 2024 aluminum alloy workpiece, and the influences of feed rate and cutting depth on residual stress are slightly greater than that of cutting speed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of the Brazilian Society of Mechanical Sciences and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
