Abstract
PurposeAiming at the cavitations and noise problem of hydraulic cone valve and based on the radial force analysis of the valve core, the radial deviation of the spool is considered to obtain the changing rules of cavitations and noise.Design/methodology/approachThe solid model of the internal flow field of cone valve is established. The mesh models are divided using ICEM-CFD software. The numerical simulation of the liquid-gas two-phase flow is performed on the cavitation and noise of the flow field inside the cone valve based on FLUENT software. The visible experimental platform for cavitation and noise of hydraulic cone valve is built. According to the contrast of the experimental results, the correctness of the simulation results is verified.FindingsThe results show that the radial deviation causes the position of the cavitation accumulates in the valve cavity on the side of the upper cone. In addition, the strength of the cavitation changes slowly with the half cone angle of 45°, and the noise level is the smallest. Furthermore, appropriately increasing the opening degree within a reasonable range can effectively suppress cavitation and reduce the noise level.Originality/valueThe cavitation can be suppressed and the noise level can be reduced by means of changing the three factors, which lays the foundation for the design and theoretical research of the cone valve.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.