Abstract
Simulation and Design of A Single Phase Inverter with Digital PWM Issued by An Arduino Board
Highlights
Inverters are circuits that transfer power from a DC source to an AC load
EXPERIMENTAL RESULTS Fig.[24] shows the practical circuit performed on a protoboard
The pulses needed for switching semiconductor devices are generated using the Arduino Uno board and the IR2110 driver
Summary
Inverters are circuits that transfer power from a DC source to an AC load. Inverters are used in applications such as adjustable-speed ac motor drives, uninterruptible power supplies (UPS), active filters, flexible ac transmission systems (FACTS), running ac appliances from an automobile battery. Inverters can be classified into many types based on output, source, type of load. Complete classification of inverter circuits is as follows:. TABLE I. classification of inverter circuits Output Source Type of Load -Square Wave. The most common one is the Pulse Width Modulation (PWM) technique. The main aim of these modulation techniques is to enhance the output of the inverters by obtaining an output voltage or current very close to sine waveform. There are many types of modulation techniques, the most familiar are:
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have