Abstract
A series of processes are carried out in order to obtain the desired product result. One of the processes carried out is testing the strength of polymers by means of tensile testing in this case testing of polymer-based sealants. The method used is the method of simulating frame loading on the tensile testing machine that has been made. The software used to assist the simulation process is SolidWorks. The simulation is carried out in static mode or a fixed loading (no movement or vibration). A stress Analysis Simulation is carried out to get the result of static loading in the form of σ (stress). Loading simulations on the frame of the tensile testing machine for the tensile testing of the sealant are carried out on the components of the frame with different loading variations. Frame components with upward loading are given an average load of 38.5 MPa. Meanwhile, the frame components with downward loading are given an average load of 6.169 MPa. The largest average stress obtained from each component is 0.326 N/mm2. this value does not exceed the yield strength of 235 N/mm2.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
