Simplifying the evaporation method for quantifying soil hydraulic properties

Abstract

AbstractSince about 25 years, we have measured the unsaturated hydraulic conductivity function and water retention curve with the evaporation method of more than 1500 mineral and organic soils samples. From this data base, 104 representative samples of varying texture and dry bulk density were selected and the temporal dynamics of the basic measured values (mass or water loss, respectively, and tension change over time) was analyzed. With the exception of sand, water loss per time interval was constant in all other mineral and organic soils during the measuring time in the tension range between 0 and about 60 kPa. In sands, the nonlinear water loss over time by evaporation can be described by a quadratic function with high accuracy (r2 > 0.99). For all other soils, a linear function is sufficient (r2 > 0.99). The use of evaporation functions enables extending weighing intervals. This reduces costs for the measuring equipment and increases the effectiveness of the method while maintaining the same quality of unsaturated hydraulic conductivity and water retention functions. It was confirmed that measuring with two tensiometers is sufficient for accurate hydraulic conductivity and water retention function. Reducing evaporation by screening the sample surface helps to decrease hydraulic gradients and keeps tension distributions approximately linear with depth. This is recommended in particular for clayey soils.