Simplified methods to estimate mean hazard due to updated ground motion model: Application to nuclear power plants in CEUS

Abstract

Two methods were developed to estimate updated mean seismic hazard for existing probabilistic seismic hazard analyses (PSHAs) due to a change in the ground motion model (GMM). Both methods were used to estimate updated hazard at nuclear power plant (NPP) sites in the Central and Eastern United States (CEUS) for a change from the Electric Power Research Institute (EPRI) 2013 GMM to the Next Generation Attenuation (NGA)-East GMM. These methods present efficient tools to inform decisions on whether to perform a full PSHA revision or other detailed evaluations, especially when a large number of sites must be analyzed. A Simplified Hazard (SiHaz) method was developed to estimate mean hazard explicitly using a reduced PSHA logic tree that incorporates the updated GMM and potential changes in the site response model. An alternative scaling method was independently developed to be applied directly to current CEUS NPP hazard. Both methods were validated using updated PSHA results at several sites. Estimates at 46 NPP sites using both methods showed good agreement for mean annual frequencies of exceedance between 1E-4 and 1E-5/yr.