Simple fabrication of micro-solid oxide fuel cell supported on metal substrate

Abstract

A simple method, without using lithography or etching processes, for fabricating a micro-solid oxide fuel cell (micro-SOFC) that utilizes a metal substrate is presented. A porous and thin (<25 μm) metal (Ni) film is fabricated by screen printing a NiO film on a ceramic substrate and subsequently reducing this film. Electrolyte and the cathode layers are sequentially deposited on the Ni-film substrate. Micro-SOFCs with a thin-film Gd-doped ceria electrolyte, supported on the Ni substrate, are successfully tested at 450 °C.