Simple and sensitive method for the measurement of volatile alkyl mercaptans in gasoline for remote field deployment

Abstract

Trace sulfur species, such as elemental sulfur, hydrogen sulfide, and volatile alkyl mercaptans, adversely affect silver based devices, such as gasoline level sensors, used in most vehicles. Identification and measurement of the sulfur species are key to developing a process control and/or treatment system to solve the problem at the refinery, prior to product distribution. A new and innovative method was developed for the analysis of specific mercaptan species in gasoline, and is reported here. The initial sample treatment stage is precipitation and stabilization of mercaptans as silver mercaptides. This stabilization could be successfully utilized in the field to mitigate the instability of mercaptans in gasoline samples. Another advantage of this step is that silver nitrate (AgNO3) precipitation concentrates the mercaptans allowing for trace level detection. The silver mercaptides are converted to pentafluorobenzyl derivatives and analyzed by gas chromatography (GC) with mass spectrometric (MS) detection. Results based on this technique show that alkyl mercaptans can be accurately measured in the full scan mode of MS with a limit of detection (LOD) of 0.02mg/L when a 100mL gasoline sample is used. The recovery of mercaptans spiked into gasoline was 85 to 120% (n=5). Gasoline producers will find knowing the exact levels of mercaptans in their products a useful tool to avoid distribution delays.