Abstract
A characteristic wavy morphology often appears at the joint interface of magnetic pulse welding (MPW), and an intermediate layer is formed in some metal combinations. It has been known that the wavy morphology changes mainly depend on the density difference between the metals. A sinusoidal wavy interface is formed for the combination of similar metals (Al/Al, Cu/Cu) and that of dissimilar metals having almost the same density (Cu/Ni). In contrast, a trigger-like wavy interface is formed for the combination having a large density difference (Al/Cu, Al/Fe). The difference in strength (hardness) of the solid metal is also assumed to affect the wavy interface morphology. In the present study, two metal combinations (Al/Cu and Al/Ni) were subjected to the MPW to elucidate the effect of hardness difference, since Cu and Ni have almost the same density, but different hardness. Both the MPWed Al/Cu and Al/Ni joints showed a trigger-like wave interface. The wave size (wave-height and wavelength) of Al/Ni was smaller than that of Al/Cu. In Al/Ni, the distribution of intermediate phase was more continuous tracing the outline of the wave. The numerical simulation of the wave formation process was performed using the Smoothed Particle Hydrodynamics (SPH) method. It was revealed that the extent of metal jet penetration into the metal in the process of joining behind the collision point was weaker in Ni than in Cu. This is considered to be due to the larger deformation resistivity of Ni, which is harder than that of Cu.
Highlights
Resent years, demand for dissimilar metal joints is increasing in many fields like automobile or electronic devices
A characteristic wavy morphology often appears at the joint interface
It is said that the solid metal around the collision point acts like a fluid due to the extremely high pressure caused by impact
Summary
Demand for dissimilar metal joints is increasing in many fields like automobile or electronic devices. Impact welding is one of the high-speed solid-state welding methods which can establish strong bonding even in the dissimilar metal combination. It has been known that the wavy morphology changes mainly depending on the density difference between the metals. A sinusoidal wavy interface is formed for the combination of similar metals (Al/Al, Cu/Cu) and that of dissimilar metals having almost the same density (Cu/Ni) (Fig. 1 (a), (b)). A trigger-like wavy interface is formed for the combination having a large density difference (Al/Cu (Fig. 1 (c)), Al/Fe). Two metal combinations (Al/Cu and Al/Ni) were subjected to the MPW to elucidate the effect of hardness difference on the joint interface morphology, since Cu and Ni have almost the same density, but different hardness
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
