Abstract
Using Ag nanowires (NWs) is a promising approach to make flexible and transparent conducting electrodes for organic photovoltaics (OPVs). However, the roughness of the NWs can decrease device performance. Herein, a Ag NW electrode embedded in a UV‐curable epoxy that uses a simple mechanical lift‐off process resulting in highly planar electrodes is demonstrated. A bimodal blend of Ag NWs with varying aspect ratios is used to optimize the transparency and conductivity of the electrode. In addition, a ZnO layer is coated on the Ag NWs prior to the embedding process to ensure low contact resistance in the OPV cells. The resulting resin‐embedded ZnO‐encapsulated silver nanowire (REZEN) electrode is found to have excellent mechanical stability. REZEN electrode‐based OPV cells exhibit comparable performance with reference devices, achieving maximum power conversion efficiency (PCE) of 13.5% and 13.6% respectively. The REZEN‐based OPV cells are also mechanically robust, retaining 97% of their PCE after 5000 cycles at R = 1.2 mm and 94% PCE after 1000 cycles at R = 0.55 mm. This flexibility is among the highest reported for freestanding devices. Thus, the REZEN electrode is a promising and simple strategy to achieve mechanically robust ITO‐free flexible OPV cells.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.