Silver nanoparticle-treated filter paper as a highly sensitive surface-enhanced Raman scattering (SERS) substrate for detection of tyrosine in aqueous solution

Abstract

Highly sensitive SERS substrates based on deposition of silver nanoparticles on commercially available filter paper were prepared in this work, and used to overcome problems found in analyses of aqueous samples. To prepare silver nanoparticle- (AgNP) doped filter substrates, a silver mirror reaction was used. The procedures for substrate preparation were systematically optimized. Pretreatment of filter paper, reaction time, temperature, and concentration of reagents for silver mirror reactions were studied. The morphologies of the resulting substrates were characterized by field-emission scanning electron microscopy (FE-SEM) and correlated with the SERS signals by probing with p-nitrothiophenol (pNTP). Filter papers with different pretreatments were found to have different sizes and distributions of AgNPs. The best performance was found when filter paper was pre-treated with ammonia solution before growth of AgNPs. Based on the SEM images, the resulting AgNPs had roughly spherical shape with a high degree of uniformity. The silver-coated filter paper substrates provide much higher SERS signals compared to glass substrates and the reproducibility was improved significantly. Based on statistical analyses, the relative standard deviations for substrate-to-substrate and spot-to-spot were both were less than 8% and the enhancement factors for the substrates were, in general, higher than 107. The SERS substrates were used to selectively detect tyrosine in aqueous solution. Results indicate that filter-based SERS substrates are highly suited to detection of tyrosine. Compared to glass-based SERS substrates, 50 times more SERS signal was observed in detection of tyrosine. The linear range can be up to 100 μM with a detection limit of 625 nM (S N −1 = 3).