Abstract

Polymeric particles are ideal drug delivery systems due to their cellular uptake-relevant size. Microparticles could be developed for direct injection of drug formulations into a diseased site, such as a tumor, allowing for drug retention and slow drug exposure over time through sustained release mechanisms. Bombyx mori silk fibroin has shown promise as a biocompatible biomaterial both in research and the clinic. Silk has been previously used to make particles using an emulsion-based method with poly(vinyl alcohol) (PVA). In this study, polydimethylsiloxane-based microfluidic devices were designed, fabricated, and characterized to produce silk particles through self-association of silk when exposed to PVA. Three main variables resulted in differences in particle size and size distribution, or polydispersity index (PDI). Utilizing a co-flow microfluidic device decreased the PDI of the silk particles as compared to an emulsion-based method (0.13 versus 0.65, respectively). With a flow-focusing microfluidics device, lowering the silk flow rate from 0.80 to 0.06 mL/h resulted in a decrease in the median particle size from 6.8 to 3.0 μm and the PDI from 0.12 to 0.05, respectively. Lastly, decreasing the silk concentration from 12% to 2% resulted in a decrease in the median particle size from 5.6 to 2.8 μm and the PDI from 0.81 to 0.25, respectively. Binding and release of doxorubicin, a cytotoxic drug commonly used for cancer treatment, with the fabricated silk particles was evaluated. Doxorubicin loading in the silk particles was approximately 41 µg/mg; sustained doxorubicin release occurred over 23 days. When the cytotoxicity of the released doxorubicin was tested on KELLY neuroblastoma cells, significant cell death was observed. To demonstrate the potential for internalization of the silk particles, both KELLY and THP-1-derived macrophages were exposed to fluorescently labelled silk particles for up to 24 h. With the macrophages, internalization of the silk particles was observed. Additionally, THP-1 derived macrophages exposure to silk particles increased TNF-α secretion. Overall, this microfluidics-based approach for fabricating silk particles utilizing PVA as a means to induce phase separation and silk self-assembly is a promising approach to control particle size and size distribution. These silk particles may be utilized for a variety of biomedical applications including drug delivery to multiple cell types within a tumor microenvironment.

Highlights

  • Novel polymeric particles are some of the most promising areas of drug delivery due to their cellular uptake-relevant size [1]

  • The microfluidic devices fabricated using photolithography and PDMS soft lithography were beneficial for fabricating silk particles of different sizes by altering material and device characteristics

  • We demonstrated that using a microfluidic device decreases the size distribution, or polydispersity index (PDI), of the silk particles when compared to a poly(vinyl alcohol) (PVA)/silk batch emulsion method

Read more

Summary

Introduction

Novel polymeric particles are some of the most promising areas of drug delivery due to their cellular uptake-relevant size [1]. This drug delivery method is characterized as either a systemic or local delivery system [2]. Systemic delivery systems are primarily IV injections containing nanoparticles that circulate through blood vessels until they reach their treatment site. Micron sized particles have been researched as a localized delivery system for many diseases as their size allow for higher drug loading and can remain in the treatment site preventing intravasation into blood vessels [4,5,6,7,8]. Hypervascularized liver tumors have been treated with locally delivered polymeric microparticles [e.g., sulfated poly(vinyl alcohol) particles loaded with doxorubicin (DEBDOX® ) and sodium acrylate alcohol copolymer microspheres loaded with doxorubicin (Hepaspheres® )] [9,10,11]

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call