Abstract
Open‐cell ceramic foams were obtained from the pyrolysis, at 1000° to 1200°C under nitrogen, of a preceramic polymer (a silicone resin) and blown polyurethanes. The morphology of the expanded polyurethane was reproduced in the final architecture of the ceramic foam. The foams produced in this way consisted of an amorphous silicon oxycarbide ceramic (SiOC), having a bulk density ranging from 0.1 to 0.4 g/cm3 and variable cell size (300 to 600 µm). Young's modulus ranged from 20 to 170 MPa, and the compression strength from 1 to 5 MPa. The foams displayed excellent dimensional stability up to their pyrolysis temperature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
