Abstract
Anti-reflection coating (ARC) is well known as an important technique to enhance solar cell performance. Typical ARC has been applied on the glass surface to reduce light reflection loss at the air/glass interface. However, reflection loss occurs not only at glass surface but also at other interfaces such as glass/transparent conductive oxide (TCO) interface. The refractive index of SiNx is tunable from 1.6 to 2.7, and the range from 1.7 to 2.0 is suitable for ARC at glass/TCO interface. In this study, we examined the AR effect of silicon nitride (SiNx) deposited by plasma enhanced chemical vapor deposition at the glass/TCO interface with thin film silicon solar cell and module. Reflectivity reduction of 1.6% for glass/ZnO substrate has been obtained with optimal SiNx layer, which contribute 2.0% gain in cell efficiency. Besides, we also confirmed the relative efficiency gain of around 2% for large-sized solar module, leading to a world-record large area stabilized module conversion efficiency of 12.34%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
