Abstract

ABSTRACTHighly sensitive electrolyte-insulator-semiconductor (EIS) sensors were realized by the integration of Si nanowires (NWs), which were fabricated by using a simple and economic electroless wet etching technique. EIS sensors with NWs longer than 1 μm were observed to have considerably increased capacitance and high pH sensitivity. The pH sensitivity of the EIS sensor with 3.8 μm long NWs was 60.2 mV/pH, which is higher than the theoretical Nernstian of 59 mV/pH. The EIS sensors with NWs exhibited slightly worse pH hysteresis and drift properties than that of the conventional planar type EIS sensor. The increases in pH sensitivity, hysteresis and drift are attributable to the extended surface area of the EIS sensors enabled by the NWs.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call