Abstract
For improving the actuation performance at low electric fields of dielectric elastomers, achieving high dielectric constant (ɛr) and low modulus (Y) simultaneously has been targeted in the past decades, but there are few ways to accomplish both. In contrast to the classical strategies such as incorporating plasticizers or ceramic to prepare the silicon-based dielectric elastomers, here, blending an amino-complexed hybrid (polyethyleneimine (PEI)-Ag) with polydimethylsiloxane (PDMS) elastomer is reported as an alternative strategy to tailor the ɛr and Y. PEI-Ag not only exhibits excellent dielectric enhancement properties but also minimizes the PDMS crosslinking through amino-complexed reaction between PEI and Pt catalysts. The prepared dielectric elastomers have a ɛr of 7.2 @ 103 Hz and Y of 1.14 MPa, leading to an actuation strain of 22.27 % at 35 V/μm. Hence, incorporating such novel hybrids based on dual amino-complexed effect on both matrix and particles sufficiently promotes the actuated performance of dielectric elastomers.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.