Abstract
The feasibility of silica removal in RO treatment of groundwater from a Western Australian mining and processing operation to prevent scaling and enhance water recovery was investigated. This study has shown that it is possible to decrease the silica concentration in RO concentrate to levels that would allow an overall water recovery of 90% to 95% using 10g/L of regenerable activated alumina adsorbent. Regeneration of the adsorbent using 2% NaOH was found to be effective for at least three regeneration cycles. A preliminary costing of the high water recovery RO process using silica removal by adsorption indicated product water (permeate) costs of $5.6/kL and savings due to a reduction in brine volume from the current 40% of feed volume to 5–10% of feed volume. It also allows better utilisation of a scarce groundwater resource, allowing the production of up to 1.6 times more low salt water from a given volume of groundwater. These results warrant larger scale investigation of silica removal and adsorbent regeneration for high recovery RO processing for mining operations, and application of silica removal to RO treatment of other silica laden waters such as coal seam gas produced water.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
