Silica Polymerization Driving Opposite Effects of pH on Aqueous Carbonation Using Crystalline and Amorphous Calcium Silicates.

Abstract

The aqueous carbonation of calcium silicate (CS), a representative alkaline-earth silicate, has been widely explored in studies of carbon dioxide (CO2) mineralization. In this context, we conducted a specific comparison of the carbonation behaviors between the crystalline calcium silicate (CCS) and amorphous calcium silicate (ACS) across a pH range from 9.0 to 12.0. Interestingly, we observed opposite pH dependencies in the carbonation efficiencies (i.e., CaO conversion into CaCO3 in 1 M Na2CO3/NaHCO3 solution under ambient conditions) of CCS and ACS─the carbonation efficiency of CCS decreased with increasing the solution basicity, while that of ACS showed an inverse trend. In-depth insights were gained through in situ Raman characterizations, indicating that these differing trends appeared to originate from the polymerization/depolymerization behaviors of silicates released from minerals. More specifically, higher pH conditions seemed to favor the carbonation of minerals containing polymerized silica networks. These findings may contribute to a better understanding of the fundamental factors influencing the carbonation behaviors of alkaline earth silicates through interfacial coupled dissolution and precipitation processes. Moreover, they offer valuable insights for selecting optimal carbonation conditions for alkaline-earth silicate minerals.