Abstract
Alkali-activated materials (AAM) are currently the subject of increasing interest and research, mainly due to the possibility to reduce the carbon dioxide (CO2) emissions in their production when compared to Portland cement (PC) and still achieve superior performance in many aspects when compared to traditional PC-based products. However, the use of sodium silicate (SS) as an alkaline activator in AAM is controversial when the aim is to reduce the environmental impact, as the production of the first also releases significant amount of CO2 per ton of activator produced. Therefore, a demand has emerged for alternative silica-rich materials that could effectively reduce the demand for SS without compromising the mechanical behaviour of the matrices and consequently the performance of fibre reinforced AAM. This paper investigates the gradual replacement (0% to 18% wt.) of metakaolin (MK) with silica fume (SF) in PVA-reinforced AAM, allowing the reduction of SS in the activator, also containing NaOH. Matrices with different composition were studied, i.e. with [SiO2]/[Al2O3] molar ratios of 3.0 and 3.8. All formulations were reinforced with 2% vol. of PVA fibres. The mechanical properties investigated were compressive strength, modulus of elasticity, flexural strength and toughness. Apparent dry density, water absorption and porosity of the composites were also assessed to give an indication of their durability. Single fibre pullout, fracture toughness and direct tensile tests were also carried out in order to understand the deformation capability of the composites. Results indicated that the employment of SF may effectively reduce the demand for SS in the alkaline activators, in order to produce alkali-activated composites with lower environmental impact (reduced CO2 emissions). Adjustments in the formulations may improve toughness in flexion in 170% with 30 wt.% reduction of SS in the activator, as well as improvements in deformation capability in tension. The development of strain-hardening MK-based AAM, however, has some challenging aspects that are also discussed.
Highlights
The intense energy consumption and the wide emission of carbon dioxide (CO2) involved in the production of Portland cement (PC) led to the development of several alternative cements, known as “green” cements, that have emerged in the last two decades
The amount of sodium hydroxide and sodium silicate used in each formulation varied to ensure that the total [SiO2]/[Al2O3] molar ratio of each system is equal to 3.0 or 3.8. [Na2O]/[SiO2] and [H2O]/[Na2O] molar ratios were held constant for all formulations with values equal to 0.26 and 12.80, respectively
silica fume (SF) particles are thinner than MK ones, but they are spherical; their incorporation in activated materials (AAM) may lead to a lower solution demand to maintain the same workability, as already verified by Rodríguez et al (2013)
Summary
The intense energy consumption and the wide emission of carbon dioxide (CO2) involved in the production of Portland cement (PC) led to the development of several alternative cements, known as “green” cements, that have emerged in the last two decades. These binders have been studied with the aim of developing products that require less energy to be produced, release less CO2 into the atmosphere, and that have similar or improved structural properties than those presented by PC products (Stavrinides, 2010; Komnitsas, 2011). The soluble silica is only detrimental when employed in high concentrations, with consequent reductions in pH and an increase in the viscosity of the activating solution, leading to a reduction in the raw material’s reaction rate (Duxson et al, 2005)
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
