Significantly Enhanced Thermal Conductivity of hBN/PTFE Composites: A Comprehensive Study of Filler Size and Dispersion.

Abstract

High-temperature polymers are attractive for applications in extreme temperatures, where they maintain their mechanical flexibility and electrical insulating properties. However, their heat dissipation capability is limited due to their intrinsically low thermal conductivities. Hexagonal boron nitride (hBN) is a chemically inert, thermally stable, and electrically insulative compound with a high thermal conductivity, making it an ideal candidate as a filler within a high-temperature polymer matrix to increase the thermal conductivity. This study evaluates the effect of filler size and dispersion on thermal conductivity by producing homogeneous composite samples using a combination of solvent mixing and resonant acoustic mixing (RAM). We carefully characterized our samples, including the spread of the size distribution, and observed that the smaller sized hBN centered around 5 μm was able to integrate more seamlessly into the polytetrafluoroethylene (PTFE) matrix with particle size in the 15 μm range and hence outperformed 30 μm, in contrast to the conventional wisdom, which asserts that larger fillers universally perform better than smaller ones. Our thermal conductivity of hBN/PTFE composites at 30 wt % is 2× higher than the literature values. Notably, we reached the record-high value of 3.5 W/m K at 40 wt % with an onset of percolation at 20 wt %, attributed to optimized hBN dispersion that facilitates the formation of thermal percolation. Our findings provide general guidelines to enhance the thermal conductivity of polymer composites for thermal management, ranging from power transmission to microelectronics cooling.