Significant hardening effect of high-temperature aging of alloy Ti-6Al-4V composite reinforced with TiC

Abstract

Titanium alloy composites, reinforced with a light second phase and made using inexpensive powder metallurgy, attract considerable attention due to the directness of their intentional hardness increase without compromising low weight of materials. In this study the metal-matrix composites (MMC) of Ti-6Al-4V alloy reinforced with light and hard particles of TiC (up to 80%, vol.) were made using blended elemental powder metallurgy of hydrogenated titanium. Post-sintering solution treatment for 45 min. at 880 °C and 1000 °C and water quenching followed by the 5 hrs. aging at 550 °C was used to additionally refine the microstructure and properties of MMC. For the duration of thermal exposure throughout solution treatment and additional aging the matrix and reinforcement phase underwent distinct structural changes that modified the mechanical properties of materials. It has been shown that the used reinforcement presents an exceptional opportunity for hardening of Ti-based composites without compromising their low specific weigh. It can increase the hardness of material by more than 40% due to the ability of TiC to chemically react with the matrix to form a strong interfacial bond and its ability to form hard compounds of Ti2C and Ti3AlC in the expense of the relatively soft matrix alloy.