Abstract

Grain boundary diffusion (GBD) process is the most effective approach for enhancing coercivity of Nd-Fe-B magnets with minimal consumption of heavy rare earth (HRE). However, understanding of GBD mechanism is still limited, especially on the anisotropic diffusion behavior within sintered magnets. Grain boundary (GB) phase is the key factor in determining the diffusion process, which acts as diffusion channel for HRE atoms. The effects of doping Ga on the grain boundary microstructure and diffusion behavior of Tb in the sintered Nd-Fe-B magnet were investigated. Sintered magnets with different Ga content (0.15 wt%, 0.45 wt%) were prepared. It should be noted that Tb was diffused perpendicular to the easy axis (c-axis) of the magnets. The coercivity increased more significantly to 2.802 T (1.006 T higher than that of the post-sinter annealed state) in magnets with high Ga content than the low Ga content magnets (2.291 T, 0.669 T higher than the post-sintered annealed state). Such a huge coercivity increment almost reached the same value by diffusing Tb along the easy axis reported by other researchers. Chemical compositions and microstructure of the GB phase were found to be key factors in influencing the HRE diffusion process. A considerable amount of Nd6Fe13Ga phase was observed near triple junctions after post-sinter annealing in the high Ga content magnets, which markedly decreased Fe concentration in the intergranular phase. In addition, amorphous intergranular metallic Cu-rich phases provided smooth diffusion channels for HRE atoms. (Nd1-x, Tbx)2Fe14B shell was much more obvious in the high Ga content magnets. Ga dopping induced novel modifications in diffusion behavior of HRE atoms and strongly influenced the magnetic properties of permanent magnets. The present approach provide new path for the manufacture of high performance magnets, which is interesting both for technical applications and fundamental studies.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call