Signalized Corridor Timing Plan Change Assessment Using Connected Vehicle Data

Abstract

Updates to traffic signal timing plans are expected to either improve operations or mitigate the effects of increased volumes. Longitudinal before-after studies are important when validating changes to traffic signal systems, but they have historically required field data collection as well as deployment of extensive detection and communication equipment. These infrastructure-based techniques are costly and hard to scale. This study utilizes commercially available connected vehicle (CV) trajectory data to assess the change in performance between August 2020 and August 2021 on a 22-intersection corridor associated with the implementation of a semi-automated adaptive control system. Approximately 1 million trajectories and 13.5 million GPS points are analyzed for weekdays in August 2020 and August 2021. The vehicle trajectory data is used to compute corridor travel times and linear referenced relative to the far side of each intersection to generate Purdue Probe Diagrams (PPD). Using the PPDs, operational measurements such as arrivals on green (AOG), split failures (SF), and downstream blockage (DSB) are calculated. Additionally, traditional Highway Capacity Manual (HCM) level of service (LOS) is estimated. Even though there was a 35% increase in annual average daily traffic (AADT), the weighted average vehicle delay only increased by two seconds, LOS did not change, AOG improved by 1%, and SF and DSB remained the same. Based on the small changes in operational performance and considering the increase in traffic volume it is concluded that the implementation of the semi-automated adaptive control system had a significant positive impact in the corridor. The presented framework can be utilized by agencies to use CV data to perform before-after studies to evaluate the impact of signal timing plan changes. The presented methodology can be applied to any location where CV trajectory data is available.