Abstract
Direct Numerical Simulation realizations were generated of a round jet under high-pressure (high-p) turbulent conditions. In the simulations, a jet of nitrogen was injected into a chamber filled with carbon dioxide for three different jet-to-chamber density ratio, s, and three different chamber pressures, pch,0. The results show that for s = 0.5 and 0.35 side jets form whereas no side jets are observed for s = 1; thus providing, for the first time, evidence of side jet formation in high-p flows. Due to these side jets, mixing of the jet fluid and chamber fluid is promoted; although the species experience regular diffusional mixing, it is shown that due to turbulent conditions there can be effective uphill thermal conduction. Analysis of the vortical features of the side jets elucidated the process through which the enhanced mixing occurs: fluid from the jet is effectively pumped in the radial direction though the combined action of dilatation/compression and vortex stretching/shrinking. The value of s is shown to control radial and circumferential mixing versus axial mixing which occurs through jet penetration in the flow. Examination of dynamic and thermodynamic quantities indicates that side jets also promote flow unsteadiness. The pressure in the chamber is demonstrated to have negligible effect on the side jets.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.