SiC coating as hydrogen permeation reduction and oxidation resistance for nuclear fuel cladding

Abstract

Silicon carbide (SiC) coating is one of the countermeasures for the prevention of oxidation and hydrogen embrittlement of fuel claddings because SiC has high resistance of oxidation and hydrogen permeation. Hydrogen permeation and oxidation experiments for the cladding materials with SiC coatings were conducted in unirradiated conditions. The sputtering method was employed to make SiC coatings. In the hydrogen permeation experiment, 316 type of stainless steel (SS316) was used as a base material of the coating. SS316 with SiC coatings showed hydrogen permeation reduction by one order of magnitude. In the oxidation experiments, Zircaloy 4 (Zry-4) and SS316 were used as base materials of the coatings. The weight gain of the Zry-4 specimens with a SiC coating decreased by about one-fifth compared to the uncoated ones at 750 °C and 1200°C. This phenomenon was observed for SS316 at 750 °C as well. The peel-off of the coating was observed in several experiments, and it is considered that the peel-off was caused by the difference of the thermal expansions between coatings and base materials. Thicker coatings showed better oxidation resistance, but thinner coatings showed more tolerance of peel-off.