Abstract

AbstractGlobal Navigation Satellite System (GNSS) clock stability is characterized via the modified Allan deviation using active hydrogen masers as the receiver frequency reference. The high stability of the maser reference allows the GNSS clock contribution to the GNSS carrier phase variance to be determined quite accurately. Satellite clock stability for four different GNSS constellations are presented, highlighting the similarities and differences between the constellations as well as satellite blocks and clock types. Impact on high‐rate applications, such as GNSS radio occultation (RO), is assessed through the calculation of the maximum carrier phase error due to clock instability. White phase noise appears to dominate at subsecond time scales. However, while we derived the theoretical contribution of white phase modulation to the modified Allan deviation, our analysis of the GNSS satellite clocks was limited to 1–200 s time scales because of inconsistencies between the subsecond results from the commercial and software‐defined receivers. The rubidium frequency standards on board the Global Positioning System (GPS) Block IIF, BeiDou, and Galileo satellites show improved stability results in comparison to previous GPS blocks for time scales relevant to RO. The Globalnaya Navigatsionnaya Sputnikovaya Sistema (GLONASS) satellites are the least stable of the GNSS constellations in the short term and will need high‐rate corrections to produce RO results comparable to those from the other GNSS constellations.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call