Abstract
Short pitch corrugation is a quasi-periodic rail defect that induces a high level of noise and accelerates track degradation. This paper proposes a methodology to mitigate short pitch corrugation by rail constraint design, including four steps. In Step 1, corrugation is numerically reproduced by employing a three-dimensional (3D) finite element (FE) vehicle-track model with degraded fastenings. In Step 2, the corrugation initiation mechanism is identified by the operating deflection shapes (ODSs) approach. In Step 3, different types of rail constraints are designed and their effects on rail vibration modes are analysed. Then FE models of these rail constraints are built up and validated. In Step 4, rail constraint models from Step 3 are applied to the 3D FE vehicle-track interaction model and their effectiveness on corrugation mitigation is evaluated. The results indicate rail longitudinal compression modes and the induced longitudinal dynamic contact force dominate the initial differential wear and corrugation initiation. Based on this mechanism, a new rail constraint is designed in this work that can completely suppress longitudinal compression modes and significantly reduce the fluctuation amplitude of the longitudinal contact force so that corrugation can hardly initiate. This paper first points out a direction for field corrugation mitigation by strengthening the rail longitudinal constraint.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
