Short and Open Circuit Fault Detection in On-Grid Photovoltaic Systems 1MWP Bangli Based on Current and Voltage Observation

Abstract

Photovoltaic (PV) systems as clean and green electrical energy generators have increased sharply in the last 10 years. The installation of a PV system in an open area is one of the causes of frequent faults/damage to the PV system. Fault in the PV system causes a decrease in efficiency, weak reliability, and disruption of the continuity of the electrical power distribution, which in turn causes the low performance of the system. This research does on the on-grid PV system 1MWp Bangli which consists of 278 PV arrays and 5004 monocrystalline solar modules 200Wp, which started operation in 2013. This research aims to find open circuit and short circuit faults that occur in the PV system Bangli. The method used in this research is the current and voltage observation method. Current and output voltage measurements from the PV array are carried out as well as measurements of working module temperature and solar irradiance. To calculate the output PV array's current (RI) and voltage (RV) indicators; Calculation of the current (RIM) and voltage (RVM) indicators under fault-free conditions, and the short circuit (TIO) and open voltage (TVS) threshold are calculated. As a result, this study succeeded in determining short and open circuit faults that occur in PV systems on grid 1MWp Bangli.