Abstract

The water-level fluctuation zone (WLFZ) of the Three Gorges Reservoir is a serious landslide-prone area. However, current remote sensing methods for landslide mapping and detection in the WLFZ are insufficient because of difficulties in data acquisition and lack of facade information. We proposed a novel shipborne mobile photogrammetry approach for 3D mapping and landslide detection in the WLFZ for the first time, containing a self-designed shipborne hardware platform and a data acquisition and processing workflow. To evaluate the accuracy and usability of the resultant 3D models in the WLFZ, four bundle block adjustment (BBA) control configurations were developed and adopted. In the four configurations, the raw Global Navigation Satellite System (GNSS) data, the raw GNSS data and fixed camera height, the GCPs extracted from aerial photogrammetric products, and the mobile Light Detection and Ranging (LiDAR) point cloud were used. A comprehensive accuracy assessment of the 3D models was conducted, and the comparative results indicated the BBA with GCPs extracted from the aerial photogrammetric products was the most practical configuration (RMSE 2.00 m in plane, RMSE 0.46 m in height), while the BBA with the mobile LiDAR point cloud as a control provided the highest georeferencing accuracy (RMSE 0.59 m in plane, RMSE 0.40 m in height). Subsequently, the landslide detection ability of the proposed approach was compared with multisource remote sensing images through visual interpretation, which showed that the proposed approach provided the highest landslide detection rate and unique advantages in small landslide detection as well as in steep terrains due to the more detailed features of landslides provided by the shipborne 3D models. The approach is an effective and flexible supplement to traditional remote sensing methods.

Highlights

  • The original contributions and novelties of this paper are summarized as follows: (1) We propose a novel and effective shipborne mobile photogrammetry approach that is composed of an in-house self-designed hardware platform as well as a data acquisition and processing workflow for 3D mapping and landslide detection of the water-level fluctuation zone (WLFZ) in the Three Gorges Reservoir Area (TGRA)

  • Compared with the results reported in other literature related to ground control points (GCPs)-assisted structure from motion (SfM) photogrammetry [76,77,78], the accuracy level of Configuration 3 was still low

  • In the accuracy assessment of the resultant 3D models of the WLFZ, we developed and adopted four different configurations of the bundle block adjustment (BBA) procedure in the data processing workflow

Read more

Summary

Introduction

The Three Gorges Dam on the Yangtze River is the largest hydropower project to date in the world. The Three Gorges Reservoir Area (TGRA) subsequently formed by the project covers more than 20 county-level administrative regions with a total surface water area of. 1080 km at a water level of 175 m and a storage capacity of 39.3 billion m3 [1,2]. Due to the local topography, geomorphology, rock mass structure, valley structure, and climate conditions in the area, the TGRA was historically a serious landslide-prone area prior to the project [3,4,5]. The reservoir started impounding water in 2003, and the water level

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call