Abstract
Abstract Shimmy motion may occur for an aircraft nose landing gear (NLG) during its takeoff, landing, and taxiing procedure, which is an undesirable motion and should be suppressed. Here, a novel torsional nonlinear energy sink (NES) based on the cam-roller mechanism is proposed and applied in the NLG to improve its shimmy performance. The torsional NES is connected with the upper and lower struts of the NLG and its mechanical characteristic is studied. A seven-dimensional dynamic model of the NLG coupled with NES is built, which considers the NLG torsional and lateral motions, and the nonlinear tire model. The numerical continuation method is applied to analyze its shimmy performance, the stable area and limit cycle oscillation (LCO) amplitude are acquired, further compared with those of the original NLG without using the NES. The results show that as the NES is used in the NLG, the torsional shimmy dominated unstable area reduces significantly and the lateral shimmy dominated unstable area decreases slightly, which results in the increase of the stable area of the NLG; the maximum LCO amplitudes for the NLG torsional and lateral shimmy become smaller, the forward speed ranges as the torsional and lateral shimmy occur become narrower, which indicates that the stable forward speed ranges of the NLG become wider; the NLG shimmy performance improves as the NES has larger torsional inertia and damping, and smaller torsional linear stiffness. Thus, the NES can suppress the NLG shimmy motion and enhance its shimmy performance effectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.