Abstract

The aim of the current study is to investigate the impact of introducing micro- and nanoparticle MgO as a filler into epoxy resin on the radiation shielding abilities of the prepared samples. To this end, we performed a gamma-radiation spectroscopy experiment with the help of an HPGe detector and Am-241, Cs-137, and Co-60 sources. We evaluated the particle size effect (PSE) and detected the maximum PSE value with the addition of 50 wt% MgO particles, indicating that nanoparticle MgO was more successful in shielding against incoming radiation than microparticle MgO. We compared the half-value layer (HVL) for the samples with 10 wt%, 20 wt%, and 30 wt % micro-MgO and nano-MgO and found that the HVL values were lower for the nanoparticle samples than for the microparticles samples, confirming that smaller particle sizes enhanced the shielding ability of the samples against radiation. The MFP results showed that epoxy matrices containing micro-MgO, for all investigated energies, resulted in higher MFP values that those containing nano-MgO.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call