Abstract
The aim of this study was to evaluate the shear bond strength of different commercial composite resin cement systems to lithium disilicate all-ceramic substrate. Five adhesive resin cement systems Panavia 21 and Panavia F (Kuraray), Variolink 2 (Ivoclar-Vivadent), RelyX Unicem Applicap and RelyX ARC (3M ESPE) were used on all-ceramic (IPS Empress 2; Ivoclar-Vivadent) substrate. Shear bond strength of adhesive resin cement to substrate was tested after thermocycling, or without thermocycling (n = 10). Substrate surfaces of the specimen after loading were SEM microscopically examined. The highest bond strengths in water stored conditions were obtained with RelyX ARC (28.7 +/-3.9 MPa), while in thermocycled conditions the highest bonding values were obtained with Variolink 2 (23.2 +/- 7.5 MPa). The lowest values in both water stored (5.8 +/- 4.0 MPa) and thermocycled (2.4 +/- 2.9 MPa) conditions were obtained with Panavia 21. Shear bond strengths appeared to be affected significantly by thermocycling (anova, P < 0.05). It was concluded that there were significant differences between the bond strengths of adhesive resin cements to lithium disilicate substrate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.