Abstract

SUMMARYReinforced concrete (RC) structural walls usually have some eccentric large openings according to the intention of the architectural design. However, the behaviour of such structures that are shear critical under cyclic loading has not been well studied. In this study, three single‐span, three‐storied, 40% scale specimens of RC structural walls with various eccentric opening ratios were constructed and tested in a lateral reverse cyclic manner until severe shear damage occurred in the walls. The main purposes of these tests were to evaluate the shear behaviour and to recognize the influence of various opening ratios on cracking and shear strength of structural walls under cyclic loading. The shear strength of specimen was calculated combining the shear strength of a structural wall without openings and the reduction factor due to openings. The comparison between the experimental results and the analytical results shows that the shear strength is different depending on the loading direction due to the eccentric opening location, the span length of short span beams may affect the cracking process and the failure mode, the approximate calculation method using Ono's reduction factor could be well applied to RC structural walls with various opening ratios less than 0.46. Copyright © 2010 John Wiley & Sons, Ltd.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call