Abstract
AbstractIn this paper, the shear behavior of glass fiber reinforced polymer (GFRP) bars reinforced ultra‐high‐performance concrete (UHPC) beams was investigated through experimental tests. Eight GFRP bars reinforced UHPC I‐beams were tested until shear failure with various stirrup ratio, reinforcement ratio, and shear span to depth ratio. The shear capacity, load–deflection relationship, cracking pattern, and failure mode were investigated in detail. The results show that the shear span to depth ratio has the greatest influence on the shear capacity of the beam among the three parameters, followed by the stirrup ratio and reinforcement ratio. The stirrup configuration can significantly improve the shear capacity and deformation resistance of the beam and can effectively reduce the stress concentration caused by the uneven distribution of steel fibers, which affects the failure mode of the beam. Increasing the stirrup ratio and reinforcement rate can improve the stiffness of the beam after cracking, and the larger the shear span to depth ratio is, the more significant the improvement effect is. Moreover, the stirrup enables the full development of the tensile capacity of GFRP bars. The existing equations of shear strength from five design codes and seven literatures are compared to the experimental results of 54 UHPC beams. It showed that the formula from the codes AFGC‐2013 and JSCE‐2006 codes is more accurate. The equations by Kwak, Jin, and Thiemicke's provide the best predictions.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
