Abstract
Cruciform beam fracture mechanics specimens have been developed in the Heavy Section Steel Technology Program at Oak Ridge National Laboratory to introduce a prototypic, far-field, out-of-plane biaxial bending stress component in the test section that approximates the nonlinear biaxial stresses resulting from pressurized-thermal-shock or pressure-temperature loading of a nuclear reactor pressure vessel (RPV). Matrices of cruciform beam tests were developed to investigate and quantify the effects of temperature, biaxial loading, and specimen size on fracture initiation toughness of two-dimensional (constant-depth) shallow surface flaws. Tests were conducted under biaxial load ratios ranging from uniaxial to equibiaxial. These tests demonstrated that biaxial loading can have a pronounced effect on shallow-flaw fracture toughness in the lower transition temperature region for RPV materials. Two and three-parameter Weibull models have been calibrated using a new scheme (developed at the University of Illinois) that maps toughness data from test specimens with distinctly different levels of crack-tip constraint to a small-scale-yielding Weibull stress space. These models, with a new hydrostatic stress criterion in place of the more commonly used maximum principal stress in the kernel of the Weibull stress integral definition, have been shown to correlate the experimentally observed biaxial effect in cruciform specimens, thereby providing a scaling mechanism between uniaxial and biaxial loading states.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.