Abstract

AbstractUnderground diaphragm walls are commonly used as a support system for the construction of subway stations, working together with inner side walls of subway stations to withstand the pressure from surrounding soils. However, the effect of diaphragm walls on the seismic response of subway stations is still not well understood yet, or at least not well considered during design. In this paper, a series of 1 g shaking table tests is designed to investigate the seismic response of a typical two‐story and three‐span subway station considering the influence of underground diaphragm walls. The stratum is simulated by synthetic model soil (a mixture of sand and sawdust), and the model structure and diaphragm walls are made by granular concrete with galvanized steel wires. A test case of the structure without diaphragm walls is also involved and taken as a benchmark comparison to understand the impact of diaphragm walls on the seismic response of subway station. The seismic excitations for the test include actual seismic records with the amplitude of 0.2, 0.4, and 0.8 g, respectively. Based on the test data analysis, a comprehensive discussion is conducted on the influence of diaphragm walls on the seismic design of underground structures. Current misconceptions that ignoring the role of diaphragm walls is a conservative way in seismic design of underground structures are also reviewed. Results show that the presence of underground diaphragm walls would enhance the lateral stiffness of the structure, and thus significantly reduce the lateral deformation of subway stations during earthquakes. Notably, the structure with diaphragm walls also exhibits a significant amplification in acceleration response and experiences greater dynamic earth pressures on the sidewalls, and furthermore the strains at the connection between the sidewalls and diaphragm walls are dramatically amplified during the earthquake. It is worth noting that these adverse effects of the diaphragm walls on the amplification of dynamic earth pressures on the structure as well as the increase of internal forces at the sidewalls end‐diaphragm walls connection should be carefully considered in the seismic design of underground structures.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call