Abstract
Low-cost, lightweight, and easily available Fresnel lenses are a more alluring choice for solar laser power production, when compared to the costly and complex heliostat-parabolic mirror systems. Therefore, a seven-rod solar laser head was designed and numerically studied to enhance the efficiency in TEM00-mode laser power production, employing six Fresnel lenses with 10 m2 total collection area for collection and concentration of sunlight. Six folding mirrors redirected the solar rays towards the laser head, composed of six fused silica aspheric lenses and rectangular compound parabolic concentrators paired together for further concentration, and a cylindrical cavity, in which seven Nd:YAG rods were mounted and side-pumped. With conventional rods, total TEM00-mode laser power reached 139.89 W, which is equivalent to 13.99 W/m2 collection efficiency and 1.47% solar-to-TEM00-mode laser power conversion efficiency. More importantly, by implementing rods with grooved sidewalls, the total laser power was increased to 153.29 W, corresponding to 15.33 W/m2 collection and 1.61% conversion efficiencies. The side-pumping configuration and the good thermal performance may ensure that the seven-grooved-rod system has better scalability than other previously proposed schemes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.