Settlements of saturated clean sand deposits in shaking table tests

Abstract

Shaking table tests were conducted on saturated clean Vietnam sand in the large biaxial laminar shear box (1880 mm×1880 mm×1520 mm) at the National Center for Research on Earthquake Engineering (NCREE), Taiwan. The settlement of sand specimens was measured and evaluated during and after each shaking test. Without liquefaction, the settlement of sand caused by shaking is very small. Significant volume changes occur only when there is liquefaction of sand. The volumetric strain of liquefied sand was calculated according to the measured settlement and the thickness of liquefied sand in the specimen. Relations between volumetric strain after liquefaction and the relative density of saturated clean sand were developed for various shaking durations and earthquake magnitudes. They are not affected by the shaking amplitude, frequency, and direction (one- or multidirectional shaking).