Abstract
The paper presents the current way of elaboration of the topographical and cadastral documentation needed in the process of tracking the behavior of hydrotechnical constructions such as earth dam. The studied area is represented by the accumulation of Pârcovaci located in the Deleni territorial administrative unit in Iași county. Using topo-geodetic measurements the magnitude of the vertical displacement of the studied construction were determined. The measurements were performed during the exploitation period of the dam, during 23 series of observations. Thus, there were highlighted the displacements of landmarks located on coping dam, downstream slope and outlet tower. Charts of evolution over time of vertical deformation have been made according to field observation. Also, the suface of the land corresponding to the whole of the accumulation of Pârcovaci was registered at Office of Cadastre and Real Estate Advertising Iași, through first registration documentation. This has made precise spatial delimitation of the set of lands and construction of studied area, and the whole land was recorded in the land book by assigning a unique cadastral number.
Highlights
The safety monitoring is very important in the operation and management of water resources and hydropower projects (Wang W. et al, 2018)
The purpose of the paper is to analyze topographic data taken over several series of observations, interpreting the results of the measurement made in order to determine the slumps and technical analysis of existing cadastral documentation
To track the evolution of vertical deformations, 17 vertical leveling landmarks were mounted on the dam body, 4 stamp marks on the access passage, a mark on the outlet tower and 6 pillars located outside the area of influence of the dam
Summary
The safety monitoring is very important in the operation and management of water resources and hydropower projects (Wang W. et al, 2018). Achieving hydro-technical objectives to the earth dams requires the use of a complex of technical and financial documentation. Different studies are used to design technical projects such as: topographic studies, geotechnical studies, hydrological studies, hydraulic studies, climate studies, hydro-geological studies, etc. In all these studies, the topographic documentation is the most important based on topographic measurements (Luca M., et al, 2017). The purpose of the paper is to analyze topographic data taken over several series of observations, interpreting the results of the measurement made in order to determine the slumps and technical analysis of existing cadastral documentation
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
