Abstract
PurposeThe soft stabilized slab and pile-supported (SSPS) embankment is an improvement technique to increase the efficiency of resources in road construction. To capture the effects of stabilized slabs on the stress transfer mechanism, the differential settlements and the lateral displacement of the embankment completely. A theoretical model of SSPS is proposed by considering the effect of soil arching and the interaction between the embankment fill, stabilized soil, pile, foundation soil and bearing stratum.Design/methodology/approachIn the theoretical model, the stress and strain coordination relationship of the system was analyzed in view of the minimum potential energy theory and equal settlement plane theory. Subsequently, the theoretical method was applied to field tests for comparison. Finally, the influence of the elastic modulus and the thickness of the stabilized slab on the stress concentration ratio and foundation settlement were examined.FindingsIn addition to the experimental findings, the method has been revealed to be reasonable and feasible, considering its ability to effectively exploit the stabilized slab effect and improve the bearing capacity of soil and piles. An economical and reasonable arrangement scheme for the thickness and strength of stabilized slabs was obtained. The results reveal that the optimum elastic modulus was chosen as 28 MPa–60 MPa, and the optimum thickness of the stabilized slab was selected as 1.5 m–2.1 m using the parameters of field tests, which can provide guidance to engineering design.Originality/valueAn optimization calculation method is established to analyze the load transfer mechanics of the SSPS embankment based on a double-equal settlement plane. The model’s rationality was analyzed by comparing the settlement and stress concentration ratios in the field tests. Subsequently, the influence of the elastic modulus and the thickness of the stabilized slab on the stress concentration ratio and settlement were examined. An economical and reasonable arrangement scheme for the thickness and elastic modulus of stabilized slabs was obtained, which can provide a novel approach for engineering design.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.