Settleability and dewaterability of sewage sludge with modified diatomite.

Abstract

In this study, cationic polyacrylamide (CPAM)-modified diatomite and cetyltrimethylammoniumbromide (CTAB)-modified diatomite were synthesized and used as conditioners for sewage sludge dewatering. The effects of these two types of modified diatomite on the dewaterability and settling performance of the activated sludge were studied. The mechanisms of the two modified diatomite types in the activated sludge system were elucidated. The efficiency of the CPAM-modified diatomite was better than that of the CTAB-modified diatomite in improving the settleability and dewaterability of sludge. The results indicated that specific resistance to filtration (SRF) was decreased from 8.52 × 1012 to 0.92 × 1012m/Kg, and the water content in the remaining sludge cake after pumping filtration was decreased from 92.2 to 68.1% by adding 0.4% of CPAM-modified diatomite and pH = 3.5, which resulted in excellent sludge settling of activated sludge. Further studies showed that the polymer/surfactant adsorbed in diatomite increased sludge dewaterability and improved the sedimentation rate owing to stripping extracellular polymeric substances (EPS) and damaging the internal structure of the sludge, leading to sludge conduce bound water release. According to scanning electron microscope (SEM) images, the two types of modified diatomite powder maintained the porous structure and showed a more complete and uniform structure compared to natural diatomite.