Series and interactive sensing coil layouts for reducing sensing channels of flexible eddy current array sensor

Abstract

PurposeFlexible eddy current array (FECA) sensor is flexible and light in weight, which has broad application prospects in structural health monitoring. But, the sensor’s sensing channel number is more, increasing the added mass of sensor networks. This paper aims to reduce the sensing channel number by changing the sensing coil layout.Design/methodology/approachIn this paper, FECA sensors with series sensing coil (SSC) layout and interactive sensing coil (ISC) layout are proposed, which reduce the number of sensor’s channels by half. Then, the variation of the output signal of the sensor when the crack expands along both sides of the hole is analyzed by simulation model. Finally, the fatigue crack monitoring experiment is carried out.FindingsFor the SSC layout, the simulation results show that the amplitude of each SSC group of the sensor increases when the crack propagates to the left or right. For the ISC layout, when the crack propagates on the right side of bolt hole, the induced voltage of each ISC group decreases. When the crack propagates on the left side of bolt hole, the induced voltage of each ISC group increases. The experiment results are consistent with simulation results, which verifies the correctness of simulation model. Compared with SSC layout, the ISC layout can judge the crack propagation direction. And the crack monitoring accuracy is 1 mm.Originality/valueThe research results provide a certain reference for reducing the number of sensor’s sensing channels. Results of the simulation and experiment show that the ISC layout can judge the crack propagation direction, and the crack monitoring accuracy is 1 mm.