Abstract

Because traditional electronics cannot directly use the alternating output voltage and current provided by electric field energy harvesters, harvesting systems require additional regulating and conditioning circuits. In this field, this work presents a conditioning circuit, called serial switch-only rectifier (SSOR) for low-voltage electric field energy harvesting (EFEH) applications. The proposed approach consists of a tubular topology harvester mounted on the outer jacket of a 230 V three-wires electrical cable (neutral, ground, and phase), in which terminals are connected to SSOR. We compare SSOR performance with classic electronic approaches, such as a full-bridge rectifier and voltage doubler. Experimental findings showed that the gathered energy by a 1 m cylindrical harvester increased in approximately 73.3% using the SSOR as a power management circuit. Experimental findings showed that the gathered energy by a 1 m cylindrical harvester increase in approximately 73.3% using the SSOR as a power management circuit. This increase is principally due to the fact that a serial bidirectional switch disconnects the harvester from the rest of the management circuit, enhancing the charge collection process. Although simulated results disclosed that SSOR increased collected energy for smaller-scale harvesters (experimental tests obtained using a 10 cm cylindrical harvester), additional losses in bidirectional switch reduced its performance. In addition, we introduce a comprehensive analysis of EFEH systems based on SSOR according to the mains frequency for future power systems.

Highlights

  • Global warming, demographic growth, and economic expansion of countries have provoked an increase in demand for electrical energy worldwide, requiring the development of more complex power systems based on non-conventional renewable energies [1]

  • We introduce a comprehensive analysis of electric field energy harvesting (EFEH) systems based on serial switch-only rectifier (SSOR) according to the mains frequency for future power systems

  • Experimental findings showed that a cylindrical harvester (1 m length) could store

Read more

Summary

Introduction

Demographic growth, and economic expansion of countries have provoked an increase in demand for electrical energy worldwide, requiring the development of more complex power systems based on non-conventional renewable energies [1]. The integration of these technologies in traditional transmission and distribution systems is not often straightforward, demanding sophistical mechanisms to guarantee the proper operation [2]. In this context, wireless sensor networks (WSNs) are aimed at bringing connectivity and integration between different power system stages. Rechargeable battery systems have enabled portable electronic applications-several constraints related to lifespan, dimensions, and availability

Methods
Results
Discussion
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call