Abstract

ObjectivesInvestigate the timing of stannous (SnF2) and sodium fluoride (NaF) application with and without salivary pellicle to prevent enamel erosion. MethodsHuman buccal molar enamel samples (n=120, REC ref 12/LO/1836) were randomly assigned to three groups testing SnF2 and NaF basic fluoride formulation and commercial mouthrinses with and without the presence of human saliva. Samples were randomly allocated to 2 subgroups: immersion in either fluoride for 1min either before or after citric acid immersion (0.3%, pH 3.2, 10min), and the cycle repeated 5 times. For human saliva group, samples were immersed in 80ml of natural saliva for 24h prior to the experiment. Analysis was done using non-contacting profilometry and microhardness change. Data were not normal and were log transformed. A linear model tested statistical differences between the groups. ResultsSnF2 application before erosion statistically reduced step height compared to application after erosion for all groups (solutions: 6.5μm (±1.2), 7.5μm (±0.8); p=0.01, mouthrinses: 3.2μm (±0.6), 4.2μm (±0.7); p<0.0001, mouthrinses with saliva: 2.5μm (±0.4), 3.1μm (±0.6); p=0.002, before and after respectively). In contrast, application of NaF before erosion increased step height compared to application after, but this was only statistically significant for the saliva group (before: 5.6μm (±0.3) and after: 4.9μm (±0.3); p=0.023). Presence of saliva increased microhardness change (p<0.0001). Within this group, greatest microhardness change was observed when SnF2 was applied before erosion and when NaF was applied after erosion (SnF2: 156.6KHN (±32.8), 123KHN (±20.1); p=0.02. NaF: 119.5KHN (±33.5), 218KHN (±24.9), before, and after respectively). ConclusionSnF2 reduced step height formation overall when compared to NaF, but particularly when applied before citric acid immersion. In contrast, NaF reduced step height when applied after citric acid immersion, but only in the presence of saliva. Clinical significanceStannous fluoride can be recommended over sodium fluoride to patients at risk of dental erosion and is optimally applied before erosion occurs. If sodium fluoride is to be used in the presence of saliva it is optimally applied after erosion has occurred.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.