Abstract
A process for recovery of zinc from acid solution with di(2‐ethyl hexyl phosphoric acid) (D2EHPA) dissolved in iso‐dodecane was carried out at 20°C in a countercurrent tubular membrane extractor using a hollow fiber as solid support. Experiments were performed at different aqueous metal concentrations (0.1–1.0 g/L), pH 0.1–2.1, and D2EHPA concentrations (2–8 v%). It was found that both the flux of metal and the extraction extent was highly influenced by the extractant concentration and the pH of the feed solution. Overall mass transfer coefficients were determined and related to the tube side, the membrane, and the shell side mass transfer by varying the aqueous flow rate (0.38–0.80 L/min) and organic flow rate (0.22–0.57 L/min) in countercurrent flow. The overall mass transfer coefficient for zinc extraction ranged from 6.2×10−6 m/s to 25.3×10−6 m/s. It was concluded that extraction kinetics were a major contributor to the overall resistance to mass transfer.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.