Separation of the Azeotropic Mixture Methanol and Toluene Using Extractive Distillation: Entrainer Determination, Vapor-Liquid Equilibrium Measurement, and Modeling.

Abstract

For separating the azeotropic mixture methanol and toluene, an extractive distillation is applied with butyl propanoate, triethylamine, and butyl butanoate as the extractive solvents, which were screened by relative volatility, selectivity, and the x–y curve. The vapor–liquid equilibrium data of the binary and ternary systems for (toluene + butyl propanoate), (toluene + triethylamine), (toluene + butyl butanoate), and (methanol + toluene + butyl butanoate) were determined. The reliability for the experimental vapor–liquid equilibrium (VLE) data was assessed with the van Ness method. The measured data was fitted by the UNIQUAC, Wilson, and NRTL models, and the correlated results were consistent with the determined VLE data. In addition, the COSMO-UNIFAC model was used to predict the VLE data for comparison.