Abstract

Selected cationic and amphoteric surfactants were effective in separating oil-in-water emulsions representative of produced emulsions expected during a surfactant/polymer (SP) process for enhanced oil recovery. The aqueous phase of the emulsion contained an anionic surfactant blend, alcohol, and partially hydrolyzed polyacrylamide. Brine composition was a suitable mixture of formation brine with brines from the surfactant slug and polymer drive. The crude oil had an American Petroleum Institute (API) gravity of 31°. Bottle tests were conducted at ambient temperature, which is near the reservoir temperature. Conventional non-ionic demulsifier resins and polymeric cationic flocculants were not effective in removing oil from the aqueous phase. The water content of the oil phase was still well above specification upon heating the emulsions to 50−60 °C. However, both oil and water phases of acceptable quality were obtained after 6 h of settling upon the addition of 200 ppm of octyltrimethylammonium bromide (C8...

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call