Abstract
Separation of primary Si phase and removal of boron in the primary Si phase during the solidification process of the Al-30%Si-10%Sn melt under a traveling magnetic field (TMF) were investigated. The results showed that the agglomeration layer of the primary Si can be formed in the periphery of the ingot while the inner microstructures mainly consist of the eutectic α-Al+Si and β-Sn phases. The intense melt flow carries the bulk liquid with higher Si content to promote the growth of the primary Si phase which is first precipitated close to the inner wall of crucible with a relatively lower temperature, resulting in the remarkable segregation of the primary Si phase. The content of impurity B in the primary Si phase can be removed effectively with an increase in magnetic flux intensity. The results of electron probe microanalysis (EPMA) clearly indicated that the average intensity of the B Ka line in the α-Al phase region of Al-Si-Sn alloy is higher in the case of solidification under TMF than that of normal solidification condition, suggesting that the electromagnetic stirring can promote the B removal from the primary Si phase.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.