Abstract
AbstractHydroxy‐terminated polybutadiene‐based porous and nonporous polyurethaneurea membranes were prepared and used to study the phenol separation efficiency from dilute aqueous solution. The porosity was developed by incorporation of lithium chloride in polymer matrix with subsequent leaching of the same in hot water. The porous membrane showed higher phenol flux over that of nonporous membrane. Permeate containing about 97 wt % phenol was obtained from feed containing 7 wt % phenol, when pervaporation was carried out with porous polyurethaneurea membrane at 75°C. The activation energies for diffusion, permeation, and pervaporation were calculated from Arrhenius plots. From the activation energy values, it was observed that the pervaporation process became easier with increased phenol concentration in the feed and porosity of the membrane used. The membrane boundary resistance was observed to decrease with increase in temperature. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1857–1865, 2006
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
