Abstract
The use of N-benzoyl-N-phenylhydroxylamine for the separation of niobium and tantalum, allows a satisfactory estimation of niobium from a tartrate solution at an acidity of 2.0 N. The pH range for complete precipitation can be extended to 6.5. For tantalum precipitation, the pH of the solution should be below 1.5 and the acidity may even be above 2.0 N. At pH 3.5–6.5, niobium is completely precipitated and tantalum remains in solution; the latter is precipitated by lowering the pH. Niobium and tantalum in ratios of 1:16 to 100:1 can be separated by a single precipitation, in the case of a ratio of 1:100 precipitation must be carried out twice. Titanium, zirconium, vanadate and molybdate interfere with the determination of niobium though other ions have no effect in the presence of complexone III and tartaric acid. The precipitates are granular and easy to filter and wash. The time taken for a complete analysis is much less than that of other methods
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.